Exercise as an antidepressant: exploring its therapeutic potential.

The COVID-19 pandemic has increased the prevalence of depressive disorders worldwide, requiring alternative treatments beyond medication and psychotherapy. Exercise has positive effects on the brain; therefore, it has emerged as a promising therapeutic option for individuals with depression. Considerable research involving humans and animals offers compelling evidence to support the mental health benefits of physical activity or exercise mediated by the regulation of complex theoretical paradigms. However, challenges such as conducting long-term follow-up assessments and considering individual characteristics remain in human studies despite extensive efforts. While animal studies provide valuable insights into the potential benefits of exercise and its impact on outcomes related to depression and anxiety in rodents exposed to different stress paradigms, translating the findings to humans requires careful evaluation. More research is needed to establish precise exercise prescription guidelines and to better understand the complex relationship between exercise and depressive disorders. Therefore, this concise review explores the evidence supporting exercise intervention as an antidepressant treatment and its underlying mechanisms.

Association of exercise-induced autophagy upregulation and apoptosis suppression with neuroprotection against pharmacologically induced Parkinson's disease.

PURPOSE: We investigated whether treadmill exercise (TE)-induced neuroprotection was associated with enhanced autophagy and reduced apoptosis in a mouse model of pharmacologically induced Parkinson's disease (PD). METHODS: PD was induced via the administration of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). C57BL/6 male mice were randomly assigned to the following three groups: control (C57BL, n=10), MPTP with probenecid (MPTP/C, n=10), and MPTP/ C plus exercise (MPTP-TE, n=10). The MPTP-TE mice performed TE training (10 m/min, 60 min/day, 5 days/week) for 8 weeks. The rotarod test was used to assess motor function. RESULTS: TE restored MPTP/P-induced motor dysfunctionand increased tyrosine hydroxylase levels. Furthermore, TE diminished the levels of α-synuclein (α-syn), a neurotoxin; modulated the levels of autophagy-associated proteins, including microtubule-associated protein 1 light chain 3-II, p62, BECLIN1, BNIP3, and lysosomal-associated membrane protein-2, which enhanced autophagy; inhibited the activation of proapoptotic proteins (caspase-3 and BAX);and upregulated BCL-2, an antiapoptosis protein. CONCLUSION: Taken together, these results suggested that the TE-induced neuroprotection against MPTP-induced cell death was associated with enhanced autophagy and neuronal regeneration based on the findings of inhibited proapoptotic events in the brains of the TE-trained animals.

Treadmill exercise produces neuroprotective effects in a murine model of Parkinson's disease by regulating the TLR2/MyD88/NF-κB signaling pathway.

Parkinson's disease (PD) is characterized by progressive dopamine depletion and a loss of dopaminergic neurons in the substantia nigra pars compacta (SNpc). Treadmill exercise is a promising non-pharmacological approach for reducing the risk of PD and other neuroinflammatory disorders, such as Alzheimer's disease. The goal of this study was to investigate the effects of treadmill exercise on α-synuclein-induced neuroinflammation and neuronal cell death in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP)-induced mouse model of PD. Eight weeks of treadmill exercise improved motor deficits and reduced α-synuclein expression, a major causative factor of PD-like symptoms, in MPTP mice. Treadmill exercise also down-regulated the expression of toll-like receptor 2 and its associated downstream signaling molecules, including myeloid differentiation factor-88, tumor necrosis factor receptor-associated factor 6, and transforming growth factor-ß-activated protein kinase 1. These effects were associated with reduced ionized calcium-binding adapter molecule 1 expression, decreased IκBα and nuclear transcription factor-κB phosphorylation, decreased tumor necrosis factor α and interleukin-1ß expression, and decreased NADPH oxidase subunit expression in the SNpc and striatum. Additionally, it promoted the expression of tyrosine hydroxylase and the dopamine transporter, as well as plasma dopamine levels, in MPTP mice; these effects were associated with decreased caspase-3 expression and cleavage, as well as increased Bcl-2 expression in the SNpc. Taken together, our data suggest that treadmill exercise improves MPTP-associated motor deficits by exerting neuroprotective effects in the SNpc and striatum, supporting the notion that treadmill exercise is useful as a non-pharmacological tool for the management of PD.

Substance flow analysis and environmental releases of PBDEs in life cycle of automobiles.

Polybrominated diphenyl ethers (PBDEs), a class of brominated flame retardants, have been widely used in many applications in industry such as automobiles, textiles, and electronics. This study focused on a quantitative substance flow analysis (SFA) of PBDEs in automobiles in order to identify their flow by life cycle and treatment pathways of PBDEs-containing materials in end-of-life vehicles (ELVs) in Korea. In addition, this study has estimated environmental releases of PBDEs in automobiles by life cycle in Korea. During this study, PBDEs were analyzed for the samples collected from several ELVs treatment facilities using X-ray fluorescence and gas chromatography/mass spectrometry (GC/MS) methods. The system boundary for SFA of PBDEs ranged from manufacturing/trade to disposal stage of automobiles by life cycle. Based on the result of the SFA, it was found that the amount of PBDEs in automobiles were the highest in use stage (7748ton/year), followed by production stage (1743ton/year) in 2014. In disposal stage, automobile shredded residues (ASR) and seat fabrics were the main components with relatively high levels of PBDEs in ELVs. The major treatment methods of such components included incineration (84%), energy recovery (9%), and landfilling (6%). This research indicates that PBDEs were emitted the highest amount from interior components during the use stage of automobiles, followed by recycling processes such as dismantling and shredding. This study suggests that PBDEs in ASR and seat fabrics should be properly managed to prevent the widespread dispersion in the environment.

Static and dynamic flow analysis of PBDEs in plastics from used and end-of-life TVs and computer monitors by life cycle in Korea.

This study focused on a quantitative substance flow analysis (SFA) of polybrominated diphenyl ethers (PBDEs) in plastics from obsolete TVs and computer monitors that often contain large amounts of the flame retardants. According to the results of the static SFA study, 1.87 tons and 0.28 tons of PBDEs from newly manufactured TVs and computer monitors were introduced into households in 2011 in Korea, respectively. There were approximately 924 tons and 90.3 tons of PBDEs present in TVs and computer monitors in households during product use, respectively. The results of the dynamic SFA study indicated that in 2017 the amount of PBDEs from TVs and computer monitors in the recycling stage is expected to be 2.63 tons and 0.1 tons, respectively. Large fractions of PBDEs from used TVs are present in recycled plastics, while PBDE-containing computer monitors are exported to Southeast Asian countries. This research indicates that PBDEs were emitted the most from recycled plastic pellet processes upon recycling. Further study may be warranted to focus the flow of PBDEs in recycled plastic products in order to determine the final destination and disposal of these chemicals in the environment.

The effect of treadmill exercise on inflammatory responses in rat model of streptozotocin-induced experimental dementia of Alzheimer's type.

PURPOSE: The aim of this study was to investigate the effect of treadmill exercise on inflammatory response in streptozotocin (STZ)-induced animal model of Alzheimer's disease (AD). METHODS: To induce the animal model of AD, Sprague-Dawley rats were injected into intracerebroventricular (ICV) injection with 1.5 mg/kg of STZ. Rats were divided into three groups as Sham-con group (n = 7), STZ-con group (n = 7) and STZ-exe group (n = 7). Exercise group ran on the treadmill for 30 min/day, 5 days/week during 6 weeks. RESULTS: The results of this study were as follows: First, STZ-exe group was improved on cognitive function when compared to STZ-con group in water maze test. Second, STZ-exe group help reduce the expression level of amyloid-beta (Aß). In addition, Toll-like receptors-4 (TLR4), Nuclear factor-kB (NF-kB), Tumor necrosis factor-α (TNF-α) and Interleukin-1α (IL-1α) level of STZ-exe group was significantly decreased when compared to STZ-con group. CONCLUSION: These results show that treadmill exercise had positive effect on cognitive function and reduced inflammatory response in STZ-induced animal model of AD.

Application of Delphi-AHP methods to select the priorities of WEEE for recycling in a waste management decision-making tool.

The management of waste electrical and electronic equipment (WEEE) or electronic waste (e-waste) has become a major issue of concern for solid waste communities due to the large volumes of waste being generated from the consumption of modern electrical and electronic products. In 2003, Korea introduced the extended producer responsibility (EPR) system to reduce the amount of electronic products to be disposed and to promote resource recovery from WEEE. The EPR currently regulates a total of 10 electrical and electronic products. This paper presents the results of the application of the Delphi method and analytical hierarchy process (AHP) modeling to the WEEE management tool in the policy-making process. Specifically, this paper focuses on the application of the Delphi-AHP technique to determine the WEEE priority to be included in the EPR system. Appropriate evaluation criteria were derived using the Delphi method to assess the potential selection and priority among electrical and electronic products that will be regulated by the EPR system. Quantitative weightings from the AHP model were calculated to identify the priorities of electrical and electronic products to be potentially regulated. After applying all the criteria using the AHP model, the results indicate that the top 10 target recycling products for the expansion of the WEEE list were found to be vacuum cleaners, electric fans, rice cookers, large freezers, microwave ovens, water purifiers, air purifiers, humidifiers, dryers, and telephones in order from the first to last. The proposed Delphi-AHP method can offer a more efficient means of selecting WEEE than subjective assessment methods that are often based on professional judgment or limited available data. By providing WEEE items to be regulated, the proposed Delphi-AHP method can eliminate uncertainty and subjective assessment and enable WEEE management policy-makers to identify the priority of potential WEEE. More generally, the work performed in this study is an example of how Delphi-AHP modeling can be used as a decision-making process tool in WEEE management.

The behavior and long-term fate of metals in simulated landfill bioreactors under aerobic and anaerobic conditions.

The long-term behavior and fate of metals in leachate from four simulated bioreactor landfills were explored using lysimeters under both aerobic and anaerobic conditions for a maximum of 1650 days. Metal concentrations varied with time and stage of landfill activity. The behavior of selected metals (Al, As, Cr, Cu, Fe, Pb, and Zn) significantly differed between aerobic and anaerobic conditions. Leachate from the aerobic lysimeters contained greater concentrations of Al, Cu, and Pb compared to leachate derived from the anaerobic lysimeters (average concentrations of Al, Cu and Pb in the aerobic/anaerobic lysimeters were 8.47/0.78 mg/L, 1.61/0.04 mg/L and 0.10/0.03 mg/L, respectively). In the anaerobic lysimeters, As, Fe and Zn leached at greater concentrations (average concentrations of As, Fe and Zn in the aerobic/anaerobic lysimeters were 0.40/1.14 mg/L, 13.5/136 mg/L and 15.3/168 mg/L, respectively). Though no significant difference in overall Cr concentrations was observed in leachate samples from aerobic and anaerobic lysimeters, during the alkali and methane phases approximately 45% of Cr was presented as Cr(VI) under aerobic conditions, whereas no Cr(VI) was detected under anaerobic conditions.

Characterization of roadway stormwater system residuals for reuse and disposal options.

The chemical characterization of sediments accumulated in catch basins and stormwater ponds provides important information for assessing risks associated with management of these residuals upon removal of accumulated deposits in stormwater systems. In this study, over a period of 15 months, more than 150 residual samples were collected from 77 catch basin units and 22 stormwater ponds from 16 municipalities throughout the state of Florida. Concentrations (mg/kg) of metals and metalloids (arsenic, barium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, and zinc) and trace organics (volatile organics, semi-volatile organics, herbicides, and pesticides) in the sediments were measured. In addition, the synthetic precipitation leaching procedure (SPLP) was utilized to evaluate pollutant leachability risk for a subset of the samples collected. Measured pollutant concentrations were compared to corresponding risk-based guidelines in Florida (i.e., Florida soil cleanup target levels) to assess potential human health risks of beneficial use of these residuals through land application. Leached concentrations were compared to risk-based water quality guidelines (i.e., Florida groundwater cleanup target levels) to examine the potential for groundwater contamination. Although several metals (arsenic, barium, chromium, copper, nickel, lead, and zinc) were routinely detected in the catch basin and stormwater pond sediments, their concentrations were generally lower than the Florida's risk-based cleanup target levels for soils. A small number of organochlorine compounds (e.g., 4,4'-DDE, 4,4'-DDT) were detected, but only in a limited number of the samples (less than 10%); leaching of trace organic pollutants above the Florida risk-based groundwater thresholds was rare. The results suggest that when land-applied or beneficially used, these residuals are not expected to pose a significant threat to human health or the environment and the results of this research will provide stormwater managers and environmental management authorities with a useful resource to examine proper disposal and beneficial use of catch basin and stormwater pond sediments.

Characterization of pollutants in Florida street sweepings for management and reuse.

Disposal and beneficial-use options for street sweeping residuals collected as part of routine roadway maintenance activities in Florida, USA, were assessed by characterizing approximately 200 samples collected from 20 municipalities. Total concentrations (mg/kg or microg/kg) and leachable concentrations (mg/L or microg/L) of 11 metals and a number of organic pollutant groups (volatile organics, semi-volatile organics, pesticides, herbicides, carbamates) in the samples were measured. The synthetic precipitation leaching procedure (SPLP) was performed to evaluate the leachability of the pollutants. From the total metal analysis, several metals (e.g., arsenic, barium, chromium, copper, nickel, lead, and zinc) were commonly found above their detection limits. Zinc was found to have the highest mean concentration of all metals measured (46.7 mg/kg), followed by copper (10.7 mg/kg) and barium (10.5mg/kg). The metal with the smallest mean concentration was arsenic (0.48 mg/kg). A small fraction of the total arsenic, barium, lead, and zinc leached in some samples using the SPLP; leached concentrations were relatively low. A few organic compounds (e.g., 4,4'-DDT, endrin, and endosulfan II) were detected in a limited number of samples. When the total and leaching results were compared to risk-based Florida soil cleanup target levels and groundwater cleanup target levels, the street sweepings were not found to pose a significant human-health risk via direct exposure or groundwater contamination.

Distribution and mobility of chromium, copper, and arsenic in soils collected near CCA-treated wood structures in Korea.

Chromated copper arsenate (CCA) is currently the most commonly used wood preservative in Korea. Questions, however, have been raised regarding the potential environmental impacts of metal leaching from CCA-treated wood to soil. Although a number of researchers from other countries have reported that chromium, copper, and arsenic do leach from CCA-treated wood over time, to date few field studies have been performed on those metals in soils adjacent to CCA-treated wood structures in Korea. The present study was conducted to determine the lateral and vertical distributions and accumulation of chromium, copper, and arsenic in soils collected from CCA-treated wood structures. A total of fifty-five composite soil samples were collected from four CCA-treated wood structures of approximately one year in age. The samples were analyzed for physicochemical properties as well as for the total chromium, copper, and arsenic concentrations. The chromium, copper, and arsenic concentrations in soil samples adjacent to the structures were as high as 79.0, 98.9, and 128 mg/kg, respectively, compared to background soil samples (48.2, 26.9, and 6.27 mg/kg, respectively). Arsenic was more mobile in soil than chromium and copper. The concentration gradient of arsenic in soil was observed only to the depth of approximately 5 cm in one year of outdoor exposure, whereas chromium and copper apparently remained near the surface (approximately less than 1 cm) after their release. Future efforts should be made to observe seasonal impacts on the release of metals and incorporate metal speciation into determining more detailed mobility and distribution.

RCRA toxicity characterization of discarded electronic devices.

The potential for discarded electronic devices to be classified as toxicity characteristic (TC) hazardous waste under provisions of the Resource Conservation and Recovery Act (RCRA) using the toxicity characteristic leaching procedure (TCLP) was examined. The regulatory TCLP method and two modified TCLP methods (in which devices were disassembled and leached in or near entirety) were utilized. Lead was the only element found to leach at concentrations greater than its TC limit (5 mg/L). Thirteen different types of electronic devices were tested using either the standard TCLP or modified versions. Every device type leached lead above 5 mg/L in at least one test and most devices leached lead above the TC limit in a majority of cases. Smaller devices that contained larger amounts of plastic and smaller amounts of ferrous metal (e.g., cellular phones, remote controls) tended to leach lead above the TC limit at a greater frequency than devices with more ferrous metal (e.g., computer CPUs, printers).

Implication of chromium speciation on disposal of discarded CCA-treated wood.

The wood preservative chromated copper arsenate (CCA) contains hexavalent chromium [Cr(VI)] and the conversion of Cr(VI) to trivalent chromium [Cr(III)] drives fixation of the treatment chemicals to the wood fibers. Since the toxicity of Cr depends on its valence state, an assessment of the Cr species occurring in CCA-treated wood, as well as leachates and ashes from CCA-treated wood, is helpful when assessing implications for disposal. In this study, both new and weathered wood samples of CCA-treated wood and their ashes were evaluated for total Cr and Cr(VI) within the solid matrices and within leachates. Results show that for both new and weathered CCA-treated wood, Cr(VI) occurred in the range of 0.7-4% of the total Cr. Greater Cr leaching occurred at the pH extremes, with Cr(VI) only measured under alkaline pH values (pH > 9.0). Total chromium concentrations from synthetic precipitation leaching procedure (SPLP) leachates from CCA-treated wood were consistently less than 3mg/L with Cr(VI) below detection limits. The results suggest that leaching of Cr(VI) from discarded CCA-treated wood should not be a concern in most landfill environments. One exception would be disposal in landfills with alkaline leachate; Cr(VI) was observed to leach from CCA-treated wood in the presence of alkaline leachate from crushed concrete. When CCA-treated wood is combusted, chromium becomes concentrated in the ash. Cr(VI) in ash from the combustion of CCA-treated wood was found between 4 and 7% of the total chromium. In ash from the combustion of wood recovered from construction and demolition (C&D) debris (which contained some CCA-treated wood), Cr(VI) accounted for as much as 43% of the total Cr. Nearly, all of the Cr in SPLP leachates produced from the ash was in the Cr(VI) form. The degree of Cr(VI) leaching from the ash was highly dependent upon the alkalinity of the ash, with higher ash leachate pH resulting in greater concentrations of Cr(VI).

Medical waste management in Korea.

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulatory agencies and waste generators to better manage the waste from healthcare facilities. This paper presents an overview of the current management practices of medical waste in Korea. Information regarding generation, composition, segregation, transportation, and disposal of medical wastes is provided and discussed. Medical waste incineration is identified as the most preferred disposal method and will be the only available treatment option in late 2005. Faced with increased regulations over toxic air emissions (e.g. dioxins and furans), all existing small incineration facilities that do not have air pollution control devices will cease operation in the next few years. Large-scale medical waste incinerators would be responsible for the treatment of medical waste generated by most healthcare facilities in Korea. It is important to point out that there is a great potential to emit air toxic pollutants from such incinerators if improperly operated and managed, because medical waste typically contains a variety of plastic materials such as polyvinyl chloride (PVC). Waste minimization and recycling, control of toxic air emissions at medical waste incinerators, and alternative treatment methods to incineration are regarded to be the major challenges in the future.

Leaching of lead from computer printed wire boards and cathode ray tubes by municipal solid waste landfill leachates.

The proper management of discarded electronic devices (E-waste) is an important issue for solid waste professionals because of the magnitude of the waste stream and because these devices often contain a variety of toxic metals (e.g., lead). While recycling of E-waste is developing, much of this waste stream is disposed in landfills. Leaching tests are frequently used to characterize the potential of a solid waste to leach when disposed in a landfill. In the United States, the Toxicity Characteristic Leaching Procedure (TCLP) is used to determine whether a solid waste is a hazardous waste by the toxicity characteristic. The TCLP is designed to simulate worse-case leaching in a landfill environment where the waste is co-disposed with municipal solid waste (MSW). While the TCLP is a required analysis from a regulatory perspective, the leachate concentrations measured may not accurately reflect the concentrations observed under typical landfill conditions. Another method that can be performed to assess the degree a pollutant might leach from a waste in a landfill is to use actual landfill leachate as the leaching solution. In this study, two lead-containing components found in electronic devices (printed wire boards from computers and cathode ray tubes from computers and televisions) were leached using the TCLP and leachates from 11 Florida landfills. California's Waste Extraction Test (WET) and the Synthetic Precipitation Leaching Procedure were also performed. The results indicated that the extractions using MSW landfill leachates resulted in lower lead concentrations than those by the TCLP. The pH of the leaching solution and the ability of the organic acids in the TCLP and WET to complex with the lead are factors that regulate the amount of lead leached.